Taking good measurements is the key to getting a cover that fits just like the original.
To help, we’ve put together this step-by-step guide.
You’ll need a measuring tape to get started.
- This is an example of a typical booth seat to be repaired.
- Trace the outline of the side of the booth.
- Paper towels can be used to create a side template; plain is best, but you can use the printed variety in a pinch.
- Make sure to trace along the far edges of the side of the booth seat.
- Use a tape measure and measure the full length of the booth seat.
- Measure the width of the seat from corner to corner.
- The other important measurement is the girth of the booth seat.
- Make sure that you start at the back and measure all the way to the front.